News

How to maintain the electrode nozzle of CNC plasma cutting machine?

Minimize perforation and cutting, perforation is molten steel back splash will hurt the nozzle, which is one of the most important reasons for cutting nozzle damage, if it is necessary to perforate cutting, it is best to use a drill bit to pre-drill the hole at the perforation, and start cutting from the pre-drill;

Use of plasma cutting consumables: good electrodes and bad nozzles

If the electrode is almost new and the nozzle is bad, the possible cause is that the nozzle has a double arc. This happens if the plasma arc touches the nozzle and melts the copper material in the nozzle mouth.

Plasma cutting machine electrode nozzle how to protect and use!

Air plasma cutting machine is a device for cutting medium and thin metal plates. It has the advantages of flexible and convenient operation, smooth cutting, narrow cutting seam, small thermal deformation, easy slag removal and high cutting efficiency. However, the torch nozzle is easily damaged, which affects the cutting efficiency and the quality of the cut, and increases the cutting cost. In order to reduce the cutting cost and extend the service life of the electrode nozzle of the plasma cutting machine, pay attention to the following points:

Welding and cutting tool set: a complete set of welding and cutting solutions

Welding and cutting tool set is a one-stop welding and cutting solution, which integrates various tools and equipment to meet the needs of welders and cutters in various working environments. By purchasing a complete set of welding and cutting tools, users can obtain all the tools they need, thereby saving time and energy, and focusing on improving work efficiency and quality. This article will detail the various products and their functions in the welding and cutting tool set.

What are the common welding equipment?

The equipment used in hand arc welding is simple, the method is simple and flexible, and the adaptability is strong, but it requires high operation of welders. Suitable for welding of carbon steel, low alloy steel, stainless steel, copper and copper alloy.

What do you know about common welding equipment?

In an electric welding machine, a device that supplies electric energy required for welding and has electric characteristics suitable for welding is called a welding power source.

Plasma cutting machine wearing parts life method

The correct gas pressure and flow of the plasma is very important for the service life of the consumable parts. If the air pressure is too high, the life of the electrode will be greatly reduced; if the air pressure is too low, the life of the nozzle will be affected.

How to use plasma electrode nozzle is not easy to bad?

Minimize perforation and cutting, perforation is molten steel back splash will hurt the nozzle, which is one of the most important reasons for cutting nozzle damage, if it is necessary to perforate cutting, it is best to use a drill bit to pre-drill the hole at the perforation, and start cutting from the pre-drill;